久久久综合精品,日本a级c片免费看三区,性做久久久久久免费观看软件,亚洲一区二区在线观看视频,日本一区二区三区网站

1956
1963
1998
2004
2008
2010

1956 Acquisition of license to manufacture batch mills

A special agitator shaft with symmetrically arranged agitator pegs and sleeves of tungsten carbide for wear protection devel- Vertical, batch operation mill for the preparation of tungsten Ideal flow behaviour due to a special agitator peg arrange-ment and the hemispherically shaped chamber floor integrated screen plate for grinding media separationIntensive cooling through a double-wall grinding tank and cooled circulation pipeline
查看詳細 >>
Development of the first continuous agitator bead mill

Product inlet via rotor / immersion tube system prevents back flow of grinding media into the feed line.
查看詳細 >>
Bottom up & Top down

Generally, there are two ways to obtain nano-powders. A bottom-up manufacturing method (bottom up) for chemical methods, such as chemical precipitation, sol-gel process (sol-gel),... Another method is physical method, which changes the powder particles from big to small (top down), such as mechanical ball milling,... And so on.
查看詳細 >>
Horizontal Disk Grinding Machines

The Development In 1963, the first vertical agitator was developed internationally, the first horizontal agitator was developed in 1975, the first horizontal agitator bead mill with eccentric disks was introduced to the public and the horizontal disc grinder was introduced， in 2004, which became the industry standard. In the following years, the grinding media separation systems, the geometry of the grinding disks and the various grinding chamber materials were further developed.
查看詳細 >>
Rod-pin nano-grinding Technology

The grinding system pin nanomill shows the evolutionary develop- ment of system with the rotor-slotted pipe separating system. The enclosed horizontal agitator mill is designed for highest product throughput rates and possesses a pin grinding system for highest grinding intensity.
查看詳細 >>
Ceramic comminution chamber technology

In 2011, we developed the first zirconia comminution chamber technology in China. It has no metal ion pollution and is used in batteries, pharmaceuticals, glazes, ink and food.
查看詳細 >>

> <

電池材料

諾研納米砂磨機廣泛應用于電池材料的研磨，分為正極材料和負極材料，正極是指用磷酸鐵鋰作為正極材料的鋰離子電池。鋰離子電池的正極材料主要有鈷酸鋰、錳酸鋰、鎳酸鋰、三元材料、磷酸鐵鋰等。其中鈷酸鋰是目前絕大多數鋰離子電池使用的正極材料。負極材料主要應用金屬硅的研磨，目前金屬研磨后的最小粒度D90≤100nm

最近，有關新型磷酸鐵鋰電池取得進展、有望取代傳統鋰電池的報道接連不，帶來了一種更接近現實的新能源技術：含鐵的鋰電池。

磷酸鐵鋰電池技術白皮書顯示，在使用納米砂磨機研磨后的復合納米材料后，單節32650規格(直徑32mm/長度65mm)電芯的能量密度能夠提升到6000mAh，與當前業界32650規格單節5000mAh的規格相比，同等體積提升了足足1000mAh，也就是20%之多，1節就能給iPhone 4S手機反復充電差不多4次。
更令人欣喜的是，在單顆低倍率充放電環境下使用，這種電池在循環使用多達3000次后，電量依舊保持在80%左右，而普通鋰電池循環充電500次左右就這德行了。按照每3天充放電一次計算，可以連續使用24年之久，是名符其實的長壽電池。
這種新型電池技術可以廣泛應用于便攜移動電源、小型UPS、筆記本電池、新能源汽車等各種設備，而且針對不同使用環境，該還按照循環充電次數的差異使用了不同的電芯顏色：面向軍工級的為金色，循環次數為3000次；民用汽車領域中使用藍色，2500次；

諾研磷酸鐵鋰用納米砂磨機采用以下新技術：

1.研磨腔體采用無金屬離子污染的全陶瓷研磨腔體；

2.納米砂磨機陶瓷材料：95%純氧化鋯陶瓷、無壓碳化硅陶瓷、氮化硅陶瓷；

3.諾研磷酸鐵鋰納米砂磨機主要型號有：NMZ10\NMZ40\NMZ80

4.整機使用了全防爆Ex設計，更加適合磷酸鐵鋰研磨用的甲醇、乙醇等防爆研磨，防爆等級達到ExdⅡBT4廠級。

推薦機型

1956 Acquisition of license to manufacture batch mills

Development of the first continuous agitator bead mill

Bottom up & Top down

Horizontal Disk Grinding Machines

Rod-pin nano-grinding Technology

Ceramic comminution chamber technology